The Place To Buy Wall Receptacles and Recessed Cable Plates Online

Installing Ethernet Wall Jack

Computer Tech’s Inside Guide to Installing Ethernet Wall Jack

Home internet connections have evolved from a luxury to a necessity. Today, more than 84% of the homes in the U.S have a computer while about 73% of those homes are connected to a broadband internet connection. Those numbers show that having a home network has quickly become a way of life for a huge majority of the population. While there is something to be said about Installing Ethernet Wall Jack when it comes to dealing with smartphones and laptops and devices that simply demand mobility, there are some glaring drawbacks with this kind of home network. Not least of which include:

  • Wireless security or lack thereof
  • Lower speeds than you would get with a hard-wired line
  • Frequent downtime issues due to bandwidth hogs

Although Wi-Fi is much better for multimedia sharing around the house, getting a hard-wired Ethernet connection offers you so much more. For starters you will have:

  • A private, high-speed internet network
  • Excellent speeds that allow for buffer-free media streaming
  • IP security camera connectivity
  • Reliable file sharing
  • Seamless online gaming

These are just a few of the advantages that come with installing Ethernet wall jack around your house. That being said, some concerns come with this kind of connection as well.

The main concern being the fact that it takes quite a bit of workmanship to have these installing Ethernet wall jack.

This step-by-step guide should help ease your pain and make the process much easier.

Installing Ethernet Wall Jack
How to Install Ethernet Wall Jack?

Plan Your Route

Depending on your specific needs, certain design issues need to be addressed before you even go out to buy all the necessary merchandise. These include concerns such as:

  • Which rooms you will want wired: Do you want your bedrooms wired? If you have a man cave, then you might want to get that in on the plans as well especially if you have a smart TV. What about your office and the children’s rooms? Consider wiring any other rooms that you frequent and might need a connection.
  • How many ports should each location have: This entirely depends on the kind of network-enabled devices you have in your possession,and how many of those would be operating in the same room at the same time. The wall plates come in a wide array of configurations from 1, 2, 4, and 6-jack ports. If you do not want to include in-room switches in your budget, you are advised to go with a high number such as 4, 6-jack wall plates. Remember, it is just as easy to Installing Ethernet Wall Jack as it is to install a 4 or 6.
  • What network speeds will be satisfactory: This will determine the kind of switch you need to get. You should consider getting a gigabit switch if you intend to do some gaming, transfer heavy files between your computers and stream online all at the same time.
  • Which is the best location for distribution: You need to find somewhere well hidden and with a lot of space. For most people, this would be the laundry room or whichever room that have their cable TV and internet wires already coming in through.
  • Which path should the cables go through: If you chose gigabit speeds, then the maximum cable length will be about 300 feet (100 meters). This gives you some room to play around. Choose a path that is away from human traffic and can easily be configured to reach all the rooms ear-marked for the Ethernet connection.

Once all this has been decided, then you need to go out and gather the tools as well as necessary merchandise.

Installing Ethernet Wall Jack
Easy way to Install the Ethernet Cable

Gather the Tools

The tools you will require greatly depends on your specific needs. Here is a basic breakdown of the necessary tools:

  • Ethernet crimping tool
  • Drill
  • Hole saw or paddle bit
  • Pointed hand saw
  • Fish tape or any strong string
  • Pencil
  • Ruler
  • Stud finder

You may also need a label maker and a sharpie-type marker,but these are optional depending on your type of workmanship. Here is a list of the materials you will also need to get:

  • 1000′ spool Cat5e or Cat6 (go for Cat6)
  • RJ45 jacks, plates, and plugs
  • Single Gang Retrofit Boxes
  • Plastic grommet (although this is just for aesthetics; it makes the cabling look neat and professional)
  • Patch panel
  • Router
  • Ethernet switch
  • Velcro strips (for cable management)

The next step is mounting the wall plates in all the right places.

Mounting the Wall Plates

If you already have a set path that was already taken by your cable TV, then all you need to do is follow that path and use your stud finder to get the studs. However, if you are mounting new wall plates, you should decide where and then draw lines. Use your pointed saw to cut through the drywall and then put the single gang box in that hole. Screw it into place and repeat for the rest of the locations.

Measuring and Running the Cable

The easiest way to do this is to run one cable from your distribution room to each of the rooms you earmarked earlier on. Once you have the exact length, cut three more cables using that measurement,so you have four cables for each room. Label them accordingly using a sharpie,so they coincide with the right ports on both ends. Give these cables a little extra wiggle room for incidentals such as crimping and stripping accidents.

Installing Ethernet Wall Jack and Patch Panel

Connecting the Wires to the Jack and Patch Panel
Test your Connection Before Installing Ethernet Wall Jack

Once you have passed your cables through all the necessary channels and paths in the wall, you can simply put an RJ45 plug at the end of the raw cable so that you plug directly into the switch. However, if you want a more permanent installation (and really more professional looking) use a patch panel.This is not as difficult to do as it might sound.

Most patch panelsare clearly labeled with color codes and diagrams showing you how to wire them correctly. The most common types follow the T568A/T568B wiring standards. So just follow the instructions given.

Once you are done with the wiring, you need to test your connection before installing Ethernet wall jack in any of your components or devices. You can use a network tester if you have one. But this is often for the professionals.

If you had all the right requirements and followed these instructions carefully, your hard-wired installing Ethernet wall jack and connection should be working perfectly. At Buyers Point, we have all the necessary materials you may need to carry this out successfully. From Ethernet wall plates to cables and switches. Give us a call today to get a full list of what you need to wire your home properly.

3 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
trackback

[…] there is a prerequisite to buying an accessory that matches the type of appliance so read more info about […]

trackback

[…] When purchasing electronic and computer accessories, there are some points that you need to consider. The first one is the brand whereby you must understand which brand does your computer or electronic device belong to. This is because, for proper functionality, it is essential that both the accessories and the electronic and computer devices belong to one brand. If you are not aware the kind of accessories to purchase, it is essential that you contact the manufacturer so that they can guide you or you can search over the internet where you will get enough info. […]

trackback

[…] are high too. Make a list of good stores that you would consider shopping from and find more info about […]